High quality thermal paste to provide excellent heat transfer from CPU/GPU to cooler.
CHECK PRICE NOW!
Read Full Review >>
DeepCool Z3 Thermal Compound for CPU Cooler (1.5g)
Posted by admin on March 29, 2012
Comments Off
3 X 1G Thermal Grease Heatsink Compound Paste CPU VGA
Posted by admin on March 24, 2012
Comments Off
Features Overview:
# new & High Quality.
# High conductivity, low bleed, stable at high temperatures.
Technical Specification
# Type: silicone fluid with 20% metal oxide.
# Thermal conductivity: >0.65 W/m-k.
# Thermal resistance: >0.262 C-in2/w.
# Dielectric breakdown: >5.0 KV ac.
# Weight of each tube: 1g.
# Color: white.
# Suitable for CPU, VGA.
CHECK PRICE NOW!
Read Full Review >>
HEATSINK CPU SILICON THERMAL PASTE GREASE COMPOUND
Posted by admin on March 20, 2012
Comments Off
100 X 1G Thermal Grease Heatsink Compound Paste CPU VGA
Posted by admin on March 7, 2012
Comments Off
Features Overview:
# new & High Quality.
# High conductivity, low bleed, stable at high temperatures.
Technical Specification
# Type: silicone fluid with 20% metal oxide.
# Thermal conductivity: >0.65 W/m-k.
# Thermal resistance: >0.262 C-in2/w.
# Dielectric breakdown: >5.0 KV ac.
# Weight of each tube: 1g.
# Color: white.
# Suitable for CPU, VGA.
CHECK PRICE NOW!
Read Full Review >>
3pc Thermal Grease Paste Compound CPU Heatsink Tube 1g
Posted by admin on February 1, 2012
Comments Off
Aavid/Thermalloy Thermalcote Thermal Joint Compound, 1 lb Tub 251G
Posted by admin on January 21, 2012
Comments Off
Material Safety Data Sheet:
http://www.aavidthermalloy.com/technical/msds/thermalcote.pdf
Thermalcote⢠is a superior thermal joint compound of thermally-loaded silicone-based grease for use with all heat sinks. It improves the transfer of thermal energy across the metal-to-metal interfaces between the transistor or rectifier case and the heat sink.
Thermalcote conducts heat approximately 15 times better than air and more than 4 times better than unloaded silicone grease. It is non-toxic, extremely stable, and neither cakes nor runs from -40° to 204°C (-40°F to 399°F).
Part number 251 and 251G are RoHS compliant. The “G” was added to the part number to signify RoHS compliance, but no difference exists between the two.
| Color | Opaque White |
| Operating Temperature Range |
-40°C to 204°C (-40°F to 399°F). |
| Thermal Conductivity |
0.765Wm-1°C-1 (.226 Btu/hr ft °F |
| Dialectic strength 1.27 mm gap(.050″ gap) |
11.8 x 103volts/mm (300volts/mil) |
| Cleaning solvent |
Mineral Spirits or Turpentine |